OpenSCAD Creeper Cam

Overview



100_6243-resized.JPG

  The guide covers the 3D printed parts used to assemble the Creeper Cam.

3D Printed Parts - Camera Enclosure and Stand

The following files from the thingiverse page linked to above are for the camera enclosure and stand:

  • camhinge.stl - This is the camera stand that attached camera enclosure to the Raspberry Pi enclosure. It is unmodified from the original author's version.
  • camera-enclosure-sample.stl - This is the enclosure for the camera. This is a remix that adds a Minecraft Creeper face to the enclosure. The source code for this part is available on Github.
  • camcaselid.stl - This is the camera enclosure lid. It is unmodified from the original author's version.

3D Printed Parts - Raspberry Pi Enclosure

 This project has a couple 3D printing options for the Raspberry Pi enclosure. The first is for only the Pi Zero v1.3 and the second option is larger and for the rest of the Raspberry Pis with a camera connector (including the Pi Zero).

3D Printed Parts - Raspberry Pi Enclosure for Pi Zero v 1.3

The following files from the thingiverse page linked to above are for the Pi Zero Creeper enclosure:

  • basic-pi-zero-creeper-enclosure.stl - This is the enclosure for the Raspberry Pi Zero. This is a remix that adds a cutout for the camera cable to exit the enclosure and reach the camera. The source code for this part is available on Github.
  • campicaselid.stl - This is the Raspberry Pi Zero enclosure lid. It is unmodified from the original author's version.

3D Printed Parts - Raspberry Pi Enclosure - Other Pis with a Camera Connector

The following files from the thingiverse page linked to above are for the :

Going Further


Date Created: 2017-10-04 17:27:57 -0500 (Wed, 04 Oct 2017)




back    |    top