Printing Vases with Cura

Overview

 This guide shows how to use Cura for making 3D printable vases from solid models.

  1. switch to Layer view mode
  2. Expert -> Switch to full view
  3. Basic -> Fill Density -> 0%
  4. Shell thickness -> 0.4mm (diameter of the extruder tip)
  5. Fill Density [...] Bottom -> Uncheck 'Solid infill top'
  6. Expert -> Open Expert Settings -> Black Magic -> check 'Spiralize the outer contour'

Date Created

Fri Nov 12 06:53:59 MST 2021


Last Updated

----





back    |    top